G/M Code Assignment

Next, double-click on the ‘G/M Code Assignments’ node from the tree view under ‘General Description’. The G-code register and M-code register will be automatically assigned. Simply change the value in the ‘Codes per block’ field to 9. This will allow up to nine G-codes on a single line of NC code.

Once you have set all the information for the the ‘G/M Code Assignments’, click on the ‘OK’ button at the right, just above the information area, to accept all of the settings. This will close the ‘G/M Code Assingments’ section of the post-processor shown in the tree view in the left-hand portion of the Quest interface.